User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
144
On the other hand, Z100 does not have the Internal Temperature Probe functionality and
the Configuration Page does not have the “Probe Calibration” box.
Z50
Z50 is functionally identical to Z70 v2 and Z100, with only a few differences (see Table 11
for more information). Due to its dimensions, the layout of the panels changes slightly,
reordering the panel elements to provide the best possible display.
Z50 pages are divided into a matrix of 4 rows and 2 columns, allowing a maximum of 8
controls per page, while the menu page allows up to 12 pages to be configured.
Note: menu page boxes are displayed at a larger size when 8 or less pages are enabled
and menu page is configured with Automatic Page Shaping.
Figure 140 Z50 pages