User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
142
Global level: when all the checkboxes are unchecked, a global view is
displayed showing the monthly averages of the last 5 years recorded.
Note: in the case of switching or step type graphs only the day and hour levels will be
available.
DATA MANAGEMENT
The recorded data is stored in memory every 5 minutes (only if the device has a valid
time). If the number of data received in that period exceeds 4, the device performs a
filtering by selecting the 4 values that will best define the graph.
There are some cases where the device can make a partial deletion of the recorded data:
When a change of date and time is made and the device has data stored from
later dates than the one established, these will be deleted to avoid having
duplicate data at the same time. Data before that date will remain stored.
When the memory is full, Z70 delete the oldest 30 days that have been
recorded.
The recorded data can be deleted or downloaded from the web server. For further
information, please refer to the “Webserver Tools” manual (available in the product
section of Z70 v2 in Zennio web portal,
www.zennio.com).