User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
136
Note: Pairing multiple Z70 v2 to a particular remote application is possible, as well as
pairing a particular Z70 v2 to multiple remote applications.
PAIRING PROCEDURE
Once Z70 v2 has been configured as described, pressing on the Device Pairing box will
bring up a pop-up window similar to Figure 135.
Figure 135. Pop-up to pairing device
In case there is any communication error with the server this pop-up will show an error
icon, allowing only to close the tab.
Figure 136. Communication error