User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
132
Figura 129. Message – Communication error
The labels of the previously mentioned messages are editable (see section
2.1.13.2).
INCOMING CALL
When Z70 v2 is receiving a call from another screen, the following dialogue will be showed:
Figure 130. Incoming call
The following items are available during an incoming internal call:
Name assigned to the contact from whom the call is received.
Reject call: rejects the call, causing the other Z70 v2 to display the message
informing that the call has ended.
Accept call: opens ongoing call dialogue (Figure 131) initiating the audio
communication.