User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
131
Figure 127. Message – Internal call ended.
Note:
Call will be cancelled if there is no answer within one minute.
When the contact has an ongoing call, the outgoing call will be cancelled by
displaying a message informing that the destination contact is busy:
Figure 128. Message – Busy contact
If, when trying to make a call, the other unit is not reachable by network, the
outgoing call dialog will be closed and the following message will be displayed: