User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
130
ANNEX II. INTERNAL CALL OPERATION
OUTCOMING CALL
To make an internal call, it is necessary to accessing the contact list or the numeric keypad
is necessary, as setting, through the internal call box (see section 2.2.2.1.5.6).
Figure 125. Contact list
The communication with the selected contact will be carried out after clicking on the
accept call button.
The Z70 v2 that is making the call will show the interface of Figure 126, in which the
following elements will be available:
Figure 126. Outgoing call
Name assigned to the contact to whom the call is directed.
Reject call: rejects the call, causing the other Z70 v2 to display a message that
the call has ended: