User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
125
ANNEX I. VIDEO INTERCOM OPERATION
INCOMING CALL
When Z70 v2 receives a call from a video door phone, the user interface in Figure 118 will
be displayed.
Figure 118. Incoming call
During an incoming call, besides displaying the camera image, the following functions will
be available:
Accept Call: opens the ongoing call dialog (Figure 121) and notifies others
synchronized screens in the same network that the call has been accepted:
Figure 119. Message – Call accepted
Reject Call: the call dialog is closed and notifies synchronized screens that the
call has been rejected:
Figure 120. Message – Call rejected