User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
122
➢ Scene Number [1 … 64]: scene sent when configured time is reached.
➢ Scene Object [General Scene Object / Individual Box Scene Object]: sets
the object through which the scene is sent. In case of choosing the Individual
Box Scene Object option the object "[Ci] Timer – Send Scene Control" will
be displayed.
Indicator Type [Icon / Text]: sets whether the indicator displayed within the
action is an icon or text.
Enablement [0 = Disable; 1 = Enable / 0 = Enable; 1 = Disable]: selects the
polarity of the control object "[Ci] Timer - Enable", which will enable or disable
the timer analogously as from the on-screen switch button of the box.
Note: security in this control can be applied to the whole box or only to the configuration
button, thus allowing to enable the timer, even if the user does not have permissions to
configure it.