User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
112
Figure 101. Video intercom (Box)
From the preview window, the video intercom configured by default will be opened and it
will be possible to navigate between the different parameterised video intercoms, showing
the image from the external unit's camera.
The call log will be common to all configured video intercom.
Figure 102. Video Intercom box
When the function is assigned to the box, the following parameter come up:
Default Unit for Preview [Generic / 1 / … / 20]: external unit displayed by default
when preview window is opened.
For more detailed information about the functions and controls of the different dialogues
that appear in Z70 v2 in relation to video intercom functionalities, please refer to ANNEX
I. Video Intercom Operation.
2.2.2.1.5.6 Internal Call
Note: Internal Call functionality requires a license installation. If not, even being possible
to configure it from ETS, its use will not be accessible.
This control enables access to the contacts list or number keypad in order to start a call
(top button) and to the internal calls log (bottom button):