User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
103
status object of the fan actuator) will express, as a percentage, the value of the current
fan level, which will be represented with a variable icon on the box.
Figure 90 Climate Control - Fan
Speed Levels [1…5]: sets how many speed levels will be available in the control.
1 to 5 levels.
Control Type: sets the type of the communication objects that will control the
fan level.
➢ [
1 bit (decrease/increase)]: orders of speed increase/decrease are sent
through the one-bit object “[Ci] (Climate) Fan Control (1-Bit)”.
➢ [Scaling]: scaling values are sent through the one-byte object “[Ci]
(Climate) Fan Control (scaling)”.
➢ [Enumeration]: integer values are sent through the one-byte object “[Ci]
(Climate) Fan Control (enumeration)”.
Cyclical [disabled/enabled]: sets whether scrolling through the speed levels is
circular or not. If checked, an increase order in the maximum level switches to
the minimum and vice versa (in the minimum level a decrease order switches to
the maximum).
Auto Mode [disabled/enabled]: sets whether the fan Auto mode will be available
or not. If checked, the following parameters are also shown.
➢ Dedicated Object for Auto Mode [
disabled/enabled]: sets how the Auto
mode should be activated. In the absence of a dedicated object, the Auto
fan mode will be activated by switching to fan level 0.