User manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
76
ANNEX. COMMUNICATION OBJECTS
NUMBER SIZE I/O FLAGS DATA TYPE (DPT)
VALUES
RANGE 1ST TIME RESET
NAME FUNCTION
0 3 Bytes I/O
C T R W
U
[10.001] DPT_Ti meOfDay 0 0 Last [General] Time Current Time
1 3 Bytes I/O
C T R W
U
[11.001] DPT_Date 01/01/1990 – 31/12/2089 01/01/2000 Last [General] Date Current Date
2 1 Byte C T – - - [18.001] DPT_SceneControl
0-63 (run)
128-191 (learn)
- - [General] Scenes: send Scene Value
3 2 Bytes O C T R – - [9.001] DPT_Value_Temp -273.00 – 670760.00 25 Last [General] Internal Temperature Current Temperature (built-in sensor)
4 2 Bytes I C – - W U [9.001] DPT_Value_Temp -273.00 – 670760.00 25 Last [General] External Temperature Temperature to show in the display
5 1 Bit I C – - W - [1.016] DPT_Ack 0/1 0 Last [General] Illumination 0=No action; 1=Light Display
6
1 Bit I C – - W - [1.001] DPT_Switch 0/1 - - [General] Touch Lock 0=Touch disabled; 1=Touch enabled
1 Bit I C – - W - [1.001] DPT_Switch 0/1 - - [General] Touch Lock 0=Touch enabled; 1=Touch disabled
7 1 Bit O C T R – - [1.001] DPT_Swi tch 0/1 - - [General] Welcome Object 1-bit Generic Control
8, 11, 14, 17, 20, 23, 26,
29, 32, 35, 38, 41, 44,
47, 50, 53, 56, 59, 62,
65, 68, 71, 74, 77, 80,
83, 86, 89, 92, 95, 98,
101, 104, 107, 110, 113, 116,
119, 122, 125, 128, 131, 134,
137, 140, 143, 146, 149
3 Bytes I/O
C T R W
U
[232.600] DPT_Colour_RGB R, G, B: 0 to 255 00 00 00 Last [PX][BX] RGB Colour Red, Green and Blue components
1 Bit I C – - W U [1.003] DPT_Enable 0/1 0 Last [PX][BX] Daily Timer Enabling 0 = Disabled; 1 = Enabled
1 Bit I C – - W U [1.003] DPT_Enable 0/1 0 Last [PX][BX] Weekly Timer Enabling 0 = Disabled; 1 = Enabled
1 Bit I C – - W U [1.005] DPT_Alarm 0/1 0 Last [PX][BX] Alarm Trigger Trigger
1 Byte I/O
C T R W
U
[5.001] DPT_Scaling 0-100 0 Last [PX][BX] Red Channel 0-100%
1 Byte I C – - W U [20.102] DPT_HVACMode
0=Confort;
1=Standby;
3=Economy;
4=Building Protection
& Rest=Nothing
1 Last [PX][BX] Special Mode Indicator
Comfort, Standby, Economy and Building
Protection
1 Byte I C – - W U [5.001] DPT_Scaling 0-100 0 Last [PX][BX] Fan Indicator 0=Off; 1-33%=Min; 34-66%=Med; >66%=Max
1 Byte I C – - W U [5.001] DPT_Scaling 0-100 0 Last [PX][BX] Fan Indicator 0=Auto; 1-33%=Min; 34-66%=Med; >66%=Max
1 Byte I C – - W U [5.001] DPT_Scaling 0-100 0 Last [PX][BX] Fan Indicator 0-33%=Min; 34-66%=Med; >66%=Max
1 Byte I C – - W U [5.001] DPT_Scaling 0-100 0 Last [PX][BX] Fan Indicator 0-49%=Min; 50-100%=Max
1 Byte I C – - W U [20.105] DPT_HVACContrMode
1=Heat;
3=Cool;
0=Auto;
9=Fan;
14=Dry
& rest=Nothinig
0 Last [PX][BX] Mode Indicator Heat, Cool, Auto, Fan and Dry
Note: columns 1st TIME and RESET show the initial value of the object, but do not necessarily imply it is automatically sent to the bus after download or after bus failure.