User manual

InZennio Z41

http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com

Special mode Icon Object value

Comfort

1 (0x001)

Standby

2 (0x002)

Economy

3 (0x003)

Protection

4 (0x004)

Table 9 Special modes vs. icon vs. object value

The remaining parameters for this function are:

 Allow protection mode: this parameter permits including (“Yes”, default

option) or excluding (“No”) the “building protection” mode from the special

modes listed in the sequential scrolling performed by the buttons.

 Left button and Right button: permit selecting the icon that will be

displayed inside the buttons in the box.

Note: the list with all the icons available in Z41 can be found in the document

“Z41 Icon list”, downloadable from www.zennio.com.

3.4.2.5 OTHER

Figure 58 Other

This category involves the following functions, which can be selected through the

Function parameter.

a) RGB

This function is intended for sending orders to thee-colour LED light regulators,

such as Lumento X3 RGB from Zennio.