User manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
59
• Off / Min / Med / Max: 0% will be associated to the off fan state;
between 1% and 33%, both included, to the minimum state; values
between 34% and 66% will be interpreted as the medium state; and
67% and over will correspond to the maximum state.
 Left button and Right button: permit selecting the icon that will be
displayed inside the buttons of the box.
Note: the list with all the icons available in Z41 can be found in the document
“Z41 Icon list”, downloadable from www.zennio.com.
d) Special modes
Figure 57 Special modes (box)
Boxes configured as special mode controls include two buttons that let the user
sequentially commute between the different special climate modes, as well as
an icon indicator that will adopt an aspect or another depending on the
currently active special mode.
Tabla 8 Special modes
When this function is assigned to the box, two 1-byte objects ([Pn][Bi] Special
mode control as the control object, and [Pn][Bi] Special mode indicator as
the status object) will be enabled. The former will be sending the bus the value
that corresponds to the mode that the user selects by touching the buttons (see
Table 9), while the status object (which can receive values from the bus
although it gets self-updated as well on button presses) will determine the
indicative icon represented in the box at any time. If this object receives an
unrecognised value from the bus, no icon will be displayed in the indicator.