User manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
56
 Heat / cool
Selecting this type of mode control turns the box into a 2-button control
one of which will activate the Heat mode, while the other one will activate
the Cool mode. A centred indicator will reflect, as an icon, the currently
active mode.
Figure 54 Heat/cool mode (box)
Two communication objects are also enabled: the [Pn][Bi] Mode control
control object and the [Pn][Bi] Mode indicator status object. When the
user activates the Cool mode, the device will send the value “0” through
the control object, while on the activation of the Heat mode the value “1”
will be sent. Moreover, the box will automatically commute between one
icon and the other every time the user executes a mode change, and also
on the reception of a new value (from the bus) through the status object.
 Extended
Selecting this type of mode control turns the box into a 2-button control,
which permit sequentially commuting among the different HVAC climate
modes. A centred indicator will reflect, as an icon, the currently active
mode.
Figure 55 Extended mode (box)
Up to five modes (Heat, Cool, Auto, Fan and Dry) are available, each of
which can be enabled/disabled in ETS by means of the proper checkbox,
which permits setting which of all the five extended modes will be included
into the sequential scrolling implemented by the buttons.