User manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
47
Range Control object Status object
1-byte (unsigned int.)
0 – 255 [Pn][Bi] 1-byte unsigned int control [Pn][Bi] 1-byte unsigned int indicator
1-byte (signed int.)
-128 – 127 [Pn][Bi] 1-byte signed int control [Pn][Bi] 1-byte signed int indicator
Percentage control
0% – 100% [Pn][Bi] Percentage control [Pn][Bi] Percentage indicator
2-byte (unsigned int.)
0 – 65535 [Pn][Bi] 2-byte unsigned int control [Pn][Bi] 2-byte unsigned int indicator
2-byte (signed int.)
-32768 – 32767 [Pn][Bi] 2-byte signed int control [Pn][Bi] 2-byte signed int indicator
2-byte (float)
-671088.64 – 670760.96 [Pn][Bi] 2-byte float control [Pn][Bi] 2-byte float indicator
Table 4 Numerical controls
For all the six functions, the available parameters are:
 Action: sets which of the two buttons will be increasing the current
numerical value and which will be decreasing it on user presses. The
permitted options are “Left Decrease, Right Increase” (default) and “Left
increase, Right Decrease”.
 Initial value: sets which value from the permitted range will be assumed
by the control prior to any button presses. It is always 0 by default.
 Minimum value: sets which value from the available range will the
minimum value permitted by the control after a number of presses on the
decrease button.
 Maximum value: sets which value from the available range will the
maximum value permitted by the control after a number of presses on the
increase button.
 Short increment: sets the increase or decrease to be applied to the
current value on every short press over the increase or decrease buttons,
respectively (i.e., the smaller the increment is, the more presses will be