User manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
46
The available parameters are:
 # Enums: number of states (up to 6) that will be distinguished. For every
distinguished state, the parameters Value and Icon will becom e available,
in order to relate every significant value of the communication object to a
certain icon that will represent it.
 Value j: numerical value (0 – 255) that will be sent through the control
object when the user, after pressing the buttons, sets the control box to
state j.
 Text j: indicative text that will be displayed in the box when the status
object (which gets automatically updated whenever a control order is sent,
although it may also receive values from the bus) acquires the numerical
value defined in the above parameter.
e) Numerical controls
In the case of assigning the box any of the six numerical functions, user
touches over the buttons will trigger the sending of a certain numerical value to
the bus (this value will be progressively increased or decreased every time the
user touches one button or the other) through the control object, while the box
itself will permanently reflect the current numerical value of the status object
(which gets automatically updated after a control order is sent to the bus,
although it may also receive values from the bus).
Table 4 shows, for each of the six functions, the permitted value range and the
name of the control and status objects.
Figure 44 1-byte (unsigned int.) 2-button control