User manual

InZennio Z41

http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com

Note: the list with all the icons available in Z41 can be found in the document “Z41 Icon

list”, downloadable from www.zennio.com.

Note: when multiple presses are made consecutively on the buttons of a control that

regulates (increases / decreases) the value of a certain status, only the final value

selected by the user will be sent to the bus, so it is not overloaded by sending all the

intermediate values.

On the other hand, the Function parameter contains a dropdown list for the selection

of the particular two-button control type to be implemented by the box. The available

options (and their related parameters) are:

a) Binary control (icon)

When the user touches the buttons, a binary value will be sent through the

[Pn][Bi] Binary control object, while the status object, [Pn][Bi] Binary

indicator, will determine the icon shown in the box.

Figure 40 Binary control (icon)

The available parameters are:

 Action: sets the value to be sent on button touches. This can be “Left 0,

Right 1” (by default) or “Left 1, Right 0”.

 Off icon and On icon: dropdown lists for the selection of the icons that will

represent the two states (0 / 1) of the [Pn][Bi] Binary indicator object,

which gets automatically updated whenever an order is sent through the

control object. It may also receive values from the bus.