User manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
27
3.2.3 TOUCH LOCK
Figure 18 Touch lock (Main configuration)
This screen is provided for the configuration of the “welcome” and “touch lock” objects.
By default two parameters are shown:
Touch locking: dropdown list with the following options: “0=Touch enabled;
1=Touch disabled” (default value) and “0=Touch disabled; 1=Touch enabled”.
Depending on the selection, sending one value or another (“0” or “1”) to
object [General] Touch lock will lock/unlock the touch panel. The detailed
behaviour of this object is described in section 3.1.
Welcome object: dropdown list with the following options: “Disabled” (default
value), “1-bit object” and “Scene”.
 If “Disabled” is selected, this functionality will remain inactive. Therefore,
nothing will happen when, after a certain standby period, the user resumes
the interaction with the touch panel.
 If “1-bit object” is selected, the [General] Welcome object binary object is
enabled and two more parameters turn visible:
• Value: value (“0” or “1”) that will be sent to the bus. By default it is “1”.
• Time to activate the welcome object: minimum time of inactivity (in
minutes) before a new press on the touch panel triggers the sending of
the welcome object. By default, it is 1 minute.