User manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
25
In case of setting up two levels, the first one is assumed to be enclosed by the second
one. This means that whenever the device asks the user to type in password #1 (to
enter a certain page), password #2 will also be accepted. On the contrary, password #1
cannot be used instead of password #2. This behaviour permits, therefore, making
password #2 available to users with further privileges while password #1 is assigned to
users with fewer privileges.
The parameters on the Security screen are:
Security levels: dropdown list for selecting whether one (default option) or
two security levels will be available. Depending on the selection, the
parameter below (Password) may show once or twice.
Note: with independence of the option selected here, later it will be necessary
to establish the security level desired for each specific page.
Password: parameter made of four additional textboxes, each of which
should contain one of the four consecutive digits (0-9) that will compose the
password. The default password is “1234”.
In case of enabling two security levels, the Password parameter will show
twice, being the first one referred to the password of Level 1, and the second
one to the password of Level 2. The default password for Level 2 is “5678”.
Figure 17 Two security levels
Important: the password insertion dialog features a specific option (lower left
button) that lets the user change, in runtime, the passwords originally set by
parameter. When the user accesses this option and prior to typing the new