Operation Manual

Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
22
USER PROFILES
Note: this function is supposed to be used only upon Zennio’s request.
Z41 Remote allows switching to certain user profiles depending on the context where
the application is going to be used. The different profiles do not entail differences in the
functionality nor implications for the user, but they ensure that the data of users of a
particular profile (e.g., users that are testing the application) and that of users of a
different profile (e.g., those performing everyday use) remain separated, thus avoiding
interference or interruptions in the normal service due to punctual requirements.
Therefore, if a particular profile needs to be set (upon Zennio’s request), the user will
need to make use of the specific configuration tool available within the iOS “Settings”
panel, next to the configuration tools of the other applications installed on the device
(see Figure 12).
To switch the user profile on the Android application, please enter the Preferences
window (Figure 8) and press any of the volume control keys of the mobile terminal for
ten times. This will enable the User Code field, so the user can enter the required
information, as provided by Zennio. When necessary, the IP field will also become
enabled.