Operation Manual

Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
21
PUSH NOTIFICATIONS
Version 3.3 or later of Z41 and version 1.1 or later of Z41 Pro, together with version
1.4.7 or later of Z41 Remote for iOS or version 1.5.0 or later of Z41 Remote for Android
provide a “push” notification function which makes it possible for the remote user to
receive a pop-up message on their mobile device as soon as an alarm event
(activation, confirmation or deactivation) has taken place on any Z41 or Z41 Pro device
has been paired with. This will happen even if the Z41 Remote application is not
running on the mobile device when the event takes place.
For further information about this feature and on the alarm events being notified, please
refer to the Z41 or Z41 Pro user manual.
Figure 22. Push notifications.
Notes:
These messages will not be shown in case “push” notifications have been disabled
on the operating system settings of the device. Please refer to the technical
documentation provided by the manufacturer.
Zennio Avance y Tecnología S.L. does not accept any responsibility for losses of
push messages due to network, hardware or software failures of any kind.