Operation Manual

Z41 Remote

http://www.zennio.com Tecnical Support: http://support.zennio.com

confirmation purposes, Z41 (or Z41 Pro) will show on screen the name of the

mobile device (according to the value of this field) it has just been paired to,

as shown in Figure 14.

Figure 14. Successful Z41 pairing.

Code: univocal pairing code that will let the mobile device identify the

particular Z41 or Z41 Pro it must link to. This code needs to be obtained from

the latter, which will display it on screen after requesting it from the pairing

code service, as depicted in Figure 15 and described in “Pairing Procedure”

under the Annex I of its User Manual.

Figure 15. Z41Pairing code introduction.

Once the above parameters are set, the user must press on Save.