Operation Manual

Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
10
Four main elements can be identified:
Device list: list of the devices already linked to the application through the
pairing procedure. This list shows no elements on the first execution.
Add device: button that brings up the Device Pairing window (see below).
Note: the Android version of the Z41 Remote application provides an additional
button, , which also allows new pairing creation, as shown in Figure 7.
Preferences: button that brings up the application settings, where the
following options can be set:
Figure 8. Preferences.
 Key press sound: enables or disables the beeps emitted by the
application when the user remotely touches any of the Z41 (or Z41 Pro)
buttons.
 Password: enables or disables the application start-up password
protection. When enabled, the application will be only accessible by users
knowing the password.
Note: if the password protection is active and the user types it wrong for three
consecutive times during the start-up, the application will remain locked for 60
seconds prior to permitting further attempts. The user will be notified about this
through a warning message and a countdown indicator.