Remote Control Application for Z41 / Z41 Pro Document Version: 1.0 www.zennio.
Z41 Remote CONTENTS Contents ........................................................................................................................................ 2 Changelog ...................................................................................................................................... 3 Z41 Remote iOS Updates ...................................................................................................... 3 Z41 Remote Android Updates..........................................
Z41 Remote CHANGELOG Z41 REMOTE IOS UPDATES App. Version 2.0.4 Changes Page(s) Support for Z41 Pro version 1.1.0. - Push notification service support. Compatibility with Z41 3.3 and the chrono-thermostat function. Multilanguage support. 1.4.7 Gas and water monitoring support. - 64-bit device support. Support for iPhone 6 and iPhone 6 Plus. Image and icon resolution improvement. 1.0.14 Minor bug fixes. - 1.0.12 Security updates. - 1.0.11 Improvements in notification messages - 1.0.9 1.0.
Z41 Remote Z41 REMOTE ANDROID UPDATES App. Version Changes Page(s) 2.0.6 Support for Z41 Pro version 1.1.0. - 1.5.6 Optimisation involving the Google Play Services. - 1.5.0 Push notification service support. Graphical interface compatibility enhancement. - Z41 3.3 and Chrono-thermostat support. 1.4.2 Gas and water monitoring support. Modification in energy, CO2 and cost format. - Alphabetical sorting of device pairings. 1.2.2 http://www.zennio.
Z41 Remote INTRODUCTION Versions 3.0 and later of Z41, as well as versions 1.1 and later of Z41 Pro, feature a specific function for the remote control of the device, which lets the user acting over the screen by means of remote iOS and Android based mobile devices in the same manner as during on-site interaction. This document is offered as a guide for integrators who are willing to configure Z41 or Z41 Pro for being controlled from these remote applications.
Z41 Remote INSTALLATION IOS INSTALLATION Z41 Remote for iOS is available on the App Store. To install on an iPhone or iPad device, please perform a search for the application and push “Download” to proceed. Figure 1. Z41 Remote Installation from iOS device. To install it through a PC/Mac connected to the mobile device, please enter iTunes and access the Z41 Remote page. Next, click the “Download” button to proceed. Figure 2. Z41 Remote Application on the App Store. http://www.zennio.
Z41 Remote Once the application has been downloaded from iTunes, open the Apps section on the iPhone or iPad and click the “Install” button. This action will update the button text to “Will Install”, allowing synchronising the iTunes client with the device. To do this, just click the “Apply” button, as shown in Figure 3: Figure 3.
Z41 Remote Figure 4. Z41 Remote installation on Android To install the application through a PC/Mac, please log into Google Play with your Google account, go to the application page and click the “Install” button, selecting the device in which the application should be installed. Figure 5. Z41 Remote installation from Google Play. http://www.zennio.com Tecnical Support: http://support.zennio.
Z41 Remote MAIN MENU When Z41 Remote runs for the first time, the user will be shown the terms and conditions of use: Figure 6. Terms and conditions. After agreeing with the terms, the main window of the application will show up, as in Figure 7: Figure 7. Main window on iOS / Android. http://www.zennio.com Tecnical Support: http://support.zennio.
Z41 Remote Four main elements can be identified: Device list: list of the devices already linked to the application through the pairing procedure. This list shows no elements on the first execution. Add device: button that brings up the Device Pairing window (see below). Note: the Android version of the Z41 Remote application provides an additional button, , which also allows new pairing creation, as shown in Figure 7.
Z41 Remote After enabling this function, a pop-up dialogue will be displayed to enter the desired password (any combination of four digits). Entering the password a second time will be required in order to confirm it. Figure 9. Password selection. Note: to disable the password protection, the user will be required to type the password currently in use. About: displays a window containing information about the application (version, identification of the manufacturer, etc.
Z41 Remote Figure 10. “About” window. Note: the Android version of the Z41 Remote application requires pressing on , which is located in the upper right corner, in order to gain access to this feature, as shown in Figure 11. Figure 11. Z41 Remote Android Preferences and about menú. Order alphabetically: by selecting this option the device list will be displayed alphabetically sorted instead of using the default, last-accessed criteria. This feature is available only on the Android version.
Z41 Remote User Code and IP: these fields are reserved for use upon Zennio’s request. Please, refer to User Profiles section for further information. Note: “User Code” on iOS devices can be found under the Main Configuration > “Z41 Remote” section, as shown in Figure 12. Figure 12. User Code on iOS devices. http://www.zennio.com Tecnical Support: http://support.zennio.
Z41 Remote DEVICE PAIRING Once in the main window (Figure 3), the user may add as many Z41s as desired, by tapping on the Add Device button. A new pop-up window will open next, as in Figure 13. Figure 13. Add device. Pairing the application to a certain Z41 or Z41 Pro requires filling the following fields: Name: text string that will identify the particular device within the entire device list shown by the application.
Z41 Remote confirmation purposes, Z41 (or Z41 Pro) will show on screen the name of the mobile device (according to the value of this field) it has just been paired to, as shown in Figure 14. Figure 14. Successful Z41 pairing. Code: univocal pairing code that will let the mobile device identify the particular Z41 or Z41 Pro it must link to.
Z41 Remote Note: on Android, saving is performed by pressing on . Unless there are communication errors between the mobile device and Z41 or Z41 Pro, the device list in the main window of the application will now include the device that has just been linked: Figure 16. Paired device.
Z41 Remote Figure 17. Pairing details. A secondary method for deletion is available on iOS from the main window itself, by simply pressing on the desired device and dragging it to the left, which will bring up a new button labelled as Delete, as shown in Figure 18. On the other hand, it is important to keep in mind that the device list only shows the five most recently accessed devices at a time.
Z41 Remote Figure 18. iOS Pairing deletion. Figure 19. Complete list of paired devices on iOS http://www.zennio.com Tecnical Support: http://support.zennio.
Z41 Remote Starting a remote control session with any of the linked devices consists in simply pressing on its name, provided that the functioning normally) or the icon (which means the device is active and icon (which means the device is active but containing active alarms) are being shown next to it (in case the device was not reachable at the moment of loading the device list, it will show the at any time by pressing on the indicator – the list can be updated icon, in the upper right corner of the s
Z41 Remote Within the Profile page: configuring the contrast, the brightness and the audible signals is not possible remotely, although the profile selection is. Within the Configuration page: the programming LED, device reset and device pairing controls are not available remotely, while the time set, the alarm log and the probe calibration do offer remote interaction (assuming they have been enabled in ETS). Figure 21. Controls not available on Z41 Remote.
Z41 Remote PUSH NOTIFICATIONS Version 3.3 or later of Z41 and version 1.1 or later of Z41 Pro, together with version 1.4.7 or later of Z41 Remote for iOS or version 1.5.0 or later of Z41 Remote for Android provide a “push” notification function which makes it possible for the remote user to receive a pop-up message on their mobile device as soon as an alarm event (activation, confirmation or deactivation) has taken place on any Z41 or Z41 Pro device has been paired with.
Z41 Remote USER PROFILES Note: this function is supposed to be used only upon Zennio’s request. Z41 Remote allows switching to certain user profiles depending on the context where the application is going to be used. The different profiles do not entail differences in the functionality nor implications for the user, but they ensure that the data of users of a particular profile (e.g., users that are testing the application) and that of users of a different profile (e.g.
Z41 Remote TROUBLESHOOTING The following chart covers the most usual issues during the device pairing and the remote access. In case the suggested verifications do not solve your issue, please contact the Zennio Technical Support at http://support.zennio.com. Dispositivo Mensaje / Evento Comprobación Pairing error Pairing code expired. Ask for a new one from your Z41. Wrong pairing code Check that the pairing code provided by your Z41 is correctly typed in your mobile device.
Join and send us your inquiries about Zennio devices: http://support.zennio.com Zennio Avance y Tecnología S.L. C/ Río Jarama, 132. Nave P-8.11 45007 Toledo (Spain). Tel. +34 925 232 002. Fax. +34 925 337 310. www.zennio.com info@zennio.
