Operation Manual

Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
71
Note: in case of disabling a sending through [Pn][Bi] Daily Timer Enabling,
the corresponding box will show the “forbidden” icon, although the box will not
lose the configuration previously set by the user.
Finally, this function offers the following parameters in ETS:
 Timer Type: switches between “1-bit value” (default option) and “Scene”.
 Scene Number: shown only after selecting “Scene” for the above
parameter. This field defines the number of the scene (1-64) that will be
sent to the bus on the execution of the timed sending.
e) Weekly Timer
Figure 77 Weekly Timer
Boxes configured as weekly timers let the final user program a timed sending of
a binary or scene value to the bus (according to the parameterisation) at a
certain time on certain days (on a weekly basis).
The difference between the daily and the weekly timers is that the latter does
not permit the countdown-based sending, although it does permit that a time-
based sending takes place every week, on the days selected by the user.
Figure 78 Weekly Timer (Box).
Hence, when the user presses on the box, a window similar to Figure 79 will
pop up