Operation Manual

Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
61
status object of the fan actuator) will express, as a percentage, the value of the
current fan level, which will be represented with a variable icon on the box.
The parameters available are:
 Action: permits setting the increase or decrease actions to one button or
another. Options are: “Left: decrease, Right increase” (default) and “Left
increase, Right decrease”.
 Fan Type: defines the number of states to be distinguished depending on
the value of the status object, so more or less different icons will be used to
represent the fan level in the box.
• Min / Max: the first state (minimum) will correspond to any value within
the range 0% to 49%, both included; the second state (maximum) will
correspond to all values greater than 49%.
• Min / Med / Max: levels between 0% and 33%, both included,
correspond to the minimum state; values between 34% and 66%, to
the medium state; and values over 67% to the maximum state.
• Auto / Min / Med / Max: a level of 0% will be interpreted as the Auto
state; levels between 1% and 33%, both included, correspond to the
minimum state; levels between 34% and 66% will be considered as
the medium state; and a value of 67% or more will correspond to the
maximum state.
• Off / Min / Med / Max: 0% will be associated to the off fan state;
between 1% and 33%, both included, to the minimum state; values
between 34% and 66% will be interpreted as the medium state; and
67% and over will correspond to the maximum state.
 Left Button and Right Button: permit selecting the icon that will be
displayed inside the buttons of the box.
Note: a list with all icons available in Z41 Pro can be found in document “Z41
Pro Icon list”, available at www.zennio.com.