Operation Manual

Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
58
Note: the parameterised setpoint type becomes transparent to the final
user, as the aspect of the on-screen box remains the same in all cases. In
addition, the setpoint status object is always a 2-byte floating point object
and will represent, in any case, the absolute value of the current
temperature setpoint.
 Left Button and Right Button: permit selecting the desired icon to be
displayed inside each button in the box.
Note: a list with all icons available in Z41 Pro can be found in document “Z41
Pro Icon list”, available at www.zennio.com.
b) Mode Control
This function turns the box into a climate mode control.
Figure 57 Heat/Cool Mode Type
Two mode control types are possible: the Heat / Cool control type and the
Extended (HVAC) control type. Selecting the former or the latter is possible
through the Mode Type parameter.
 Heat / Cool
Selecting this type of mode control turns the box into a 2-button control
one of which will activate the Heat mode, while the other one will activate
the Cool mode. A centred indicator will reflect, as an icon, the currently
active mode.
Figure 58 Heat/cool Mode (Box)