Operation Manual

Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
38
Note: a list with all icons available in Z41 Pro can be found in document “Z41
Pro Icon list”, available at www.zennio.com.
b) Binary Indicator (Text)
The box will behave as a binary state indicator. Each of the two states will be
shown in the box through a different label. When the box is assigned this
function, the [Pn][Bi] Binary indicator object will become available, as well as
the parameters that permit typing the text to be shown when the object receives
a “0” (Text Off) and that to be shown when it becomes “1” (Text On).
Therefore, when the device receives the values “0” or “1” through the
aforementioned object, the box will show one text or another.
Figure 32 Binary Indicator (Text)
c) Enumerated Indicator (Icon)
The box will behave analogously to the case of the Binary indicator (Icon),
however, it will be possible to distinguish up to 6 states (configurable through
the # Enums parameter) instead of only two. The states will be determined by
the reception of any values between 0 and 255, instead of only values 0 and 1.
When this function is assigned to the box, a 1-byte communication object,
[Pn][Bi] Enumerated Indicator, will become available as well as two more
parameters (Value and Icon) for each of the states to be distinguished. This
allows setting which icon will be shown in the box upon the reception of which
value through the communication object.
Figure 33 Enumerated Indicator (Icon)