Operation Manual

Z41 Lite
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
83
1 Byte
C T - - -
DPT_SceneControl
0-63; 128-191
[Ix] [Short Press] Save Scene
Sending of 128 - 191
1 Bit
I/O
C T R W -
DPT_Switch
0/1
[Ix] [Switch/Sensor] Edge
Sending of 0 or 1
1 Byte C T - - - DPT_Value_1_Ucount 0 - 255
[Ix] [Short Press] Constant
Value (Integer)
0
- 255
1 Byte C T - - - DPT_Scaling 0% - 100%
[Ix] [Short Press] Constant
Value (Percentage)
0%
- 100%
2 Bytes C T - - - DPT_Value_2_Ucount 0 - 65535
[Ix] [Short Press] Constant
Value (Integer)
0
- 65535
2 Bytes C T - - - 9.xxx
-671088.64 -
670760.96
[Ix] [Short Press] Constant
Value (float)
Float value
237, 243
1 Byte I C - - W - DPT_Scaling 0% - 100%
[Ix] [Short Press] Shutter
Status (input)
0% = Top; 100% = Bottom
1 Byte I C - - W - DPT_Scaling 0% - 100%
[Ix] [Short Press] Dimming
Status (input)
0%
- 100%
238, 244
1 Bit
C T - - -
DPT_Switch
0/1
[Ix] [Long Press] 0
Sending of 0
1 Bit
C T - - -
DPT_Switch
0/1
[Ix] [Long Press] 1
Sending of 1
1 Bit I C T - W - DPT_Switch 0/1
[Ix] [Long Press] 0/1
Switching
Switching 0/1
1 Bit C T - - - DPT_UpDown 0/1
[Ix] [Long Press] Move Up
Shutter
Sending of 0 (Up)
1 Bit C T - - - DPT_UpDown 0/1
[Ix] [Long Press] Move Down
Shutter
Sending of 1 (Down)
1 Bit C T - - - DPT_UpDown 0/1
[Ix] [Long Press] Move
Up/Down Shutter
Switching 0/1 (Up/Down)
1 Bit C T - - - DPT_Step 0/1
[Ix] [Long Press] Stop/Step Up
Shutter
Sending of 0 (Stop/Step up)
1 Bit C T - - - DPT_Step 0/1
[Ix] [Long Press] Stop/Step
Down Shutter
Sending of 1 (Stop/Step down)
1 Bit C T - - - DPT_Step 0/1
[Ix] [Long Press] Stop/Step
Shutter (switched)
Switching of 0/1 (Stop/Step up/down)
4 Bit C T - - - DPT_Control_Dimming
0x0 (Stop)
0x1 (Dec. by 100%)
…
0x7 (Dec. by 1%)
0x8 (Stop)
0x9 (Inc. by 100%)
…
0xF (Inc. by 1%)
[Ix] [Long Press] Brighter
Long Pr.
-> Brighter; Release -> Stop
4 Bit C T - - - DPT_Control_Dimming
0x0 (Stop)
0x1 (Dec. by 100%)
…
0x7 (Dec. by 1%)
0x8 (Stop)
0x9 (Inc. by 100%)
[Ix] [Long Press] Darker
Long Pr.
-> Darker; Release -> Stop