Operation Manual

Z41 Lite
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
63
Figure 71 Energy Monitor (KES). Pop-Up Window.
Prior to detailing the elements shown in the pop-up window, the ETS
parameters for this type of function will be described:
 Energy Monitor Channel: dropdown list for the selection of the channel (1
– 6) that will be associated to the box. The channel selected here must
have been enabled from the Energy Monitor Objects screen (see section
3.2.5) under the Main configuration tab. This way, the box will be
monitoring the values received through the [Energy x] Power, [Energy x]
Energy, [Energy x] CO2 and [Energy x] Cost objects, where “x” is the
number of the assigned channel.
Important: although it is possible to assign the “Energy monitor (KES)”
function to any box from any page, it is only possible to control as many as
six different energy channels, as it is not possible to have an exclusive
channel for each of the boxes.
 Energy Consumption: determines whether the pop-up window should
show the instant value of the [Energy x] Energy object or not.
 CO2: determines whether the pop-up window should show the instant
value of the [Energy x] CO2 object or not.
 Cost: determines whether the pop-up window should show the instant
value of the [Energy x] Cost object or not.
When this function is assigned to the box, two 1-bit communication objects
show up: [Pn][Bi] Energy Monitor: Request and [Pn][Bi] Energy Monitor:
Evolution of the Power
Consumption Object.
Instant Value of the
Energy, CO
2
and Cost
Objects.
Zoom Level
Validation / Reset / Refresh
Buttons