Operation Manual

Z41 Lite
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
60
Note: a list with all icons available in Z41 Lite can be found in document “Z41
Lite Icon list”, available at www.zennio.com.
Regarding the RGB control boxes themselves, a central label will permanently
show, as a percentage, the current light level (which is determined by the
channel with the highest current light level). This indicator gets updated
automatically as the user interacts with the box, but is also conditioned by the
values received from the bus through the already described objects.
Figure 64 RGB (Box)
Moreover, two buttons can be found in the box:
 The button on the left, which is an On/Off switch, permits commuting
between a total absence of light in the three channels, and their respective
states previous to the switch-off.
 The button on the right, when pressed, launches a colour palette that
permits the selection of a light level for every channel, either by touching
on any of the pre-set colours, or by separately selecting the level of each
channel (R, G, B).
Figure 65 RGB Colour Palette
A set of recently used colours is shown at the bottom of the palette. These
colours refer to those recently used within that particular box.
Confirmation Button &
Current Colour
Pre-set
Colours
Recent Colours
Precise Per-Channel
Controls