Operation Manual

Z41 Lite

http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com

When this function is assigned to the box, two 1-byte objects ([Pn][Bi] Special

Mode Control as the control object, and [Pn][Bi] Special Mode Indicator as

the status object) will be enabled. The former will be sending the bus the value

that corresponds to the mode that the user selects by touching the buttons (see

Table 6), while the status object (which can receive values from the bus

although it gets self-updated as well on button presses) will determine the

indicative icon represented in the box at any time. If this object receives an

unrecognised value from the bus, no icon will be displayed in the indicator.

Special Mode Icon Object Value

Comfort

1 (0x001)

Standby

2 (0x002)

Economy

3 (0x003)

Protection

4 (0x004)

Table 6 Special Modes vs. Icon vs. Object Value

The remaining parameters for this function are:

 Allow Protection Mode: this parameter permits excluding (“No”, default

option) or including (“Yes”) the “building protection” mode from the special

modes listed in the sequential scrolling performed by the buttons.

 Left Button and Right Button: permit selecting the icon that will be

displayed inside the buttons in the box.

Note: a list with all icons available in Z41 Lite can be found in document “Z41

Lite Icon list”, available at www.zennio.com.

3.4.2.5 OTHER

Figure 62 Other