Operation Manual

Z41 Lite
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
31
In addition, one checkbox is shown per general-purpose page (that is, pages 1 to 6), as
well as two more checkboxes for the Profile and Configuration pages. Each of these
checkboxes will allow enabling or disabling the corresponding page in the device – a
specific ETS tab will appear upon the activation of a page. The next sections of this
manual describe these tabs in detail.
3.4 PAGE n
When any of the general-purpose pages is enabled from the Configuration screen
under the Menu tab, a new tab named Page n will appear, where n is the number of
the page.
Under this tab, one screen (Configuration) will be initially displayed to let the
integrator enable or disable each of the boxes in the page. Depending on that, more
parameter screens will appear.
Note: figures in this section will show the parameters of a certain page (for instance,
page 1) or a certain box (for instance, box 1). The parameters for other pages or boxes
are totally analogous.
3.4.1 CONFIGURATION
Figure 26 Configuration (Page n)
This screen contains the following parameters:
Title: text field that sets the title shown on the top of the Menu page.