Operation Manual

Z41 Lite

http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com

3.2.6 WHITE-CHANNEL OBJECTS

Figure 23 White-Channel Objects (Main Configuration)

This screen contains four checkboxes that allow the integrator enable or disable up to

four 1-byte communication objects independently, named [RGBW] White Channel x,

through which regulation orders (expressed as percentage values) may be sent to the

white colour channels of one or more RGBW light dimmers.

For further information about the usage of these objects and about the per-channel

dimming controls implemented by Z41 Lite, please refer to epigraph b) in section

3.4.2.5.

3.2.7 FIRMWARE UPDATE

Figure 24 Firmware Update (Main Configuration)

This tab lets the integrator enable or disable the device firmware update function (see

section 1.3.1) through the USB port. The only parameter is:

USB Updating: “Enabled” (default option) or “Disabled”.

Note: Z41 Lite does not provide an Ethernet interface for firmware update

purposes.