Operation Manual

Z41 Lite
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
23
Figure 16 Password Insertion Dialog (for password-protected pages)
In case of setting up two levels, the first one is assumed to be enclosed by the second
one. This means that whenever the device asks the user to type password #1 (to enter
a certain page); password #2 will also be accepted. On the contrary, password #1
cannot be used instead of password #2. This behaviour permits, therefore, making
password #2 available to users with further privileges while password #1 is assigned to
users with fewer privileges.
The parameters on the Security screen are:
Security Levels: dropdown list for selecting whether one (default option) or two
security levels will be available. Depending on the selection, the parameter
below (Password) may show once or twice.
Note: with independence of the option selected here, it will be necessary to
establish the security level desired for each specific page of controls.
Password: parameter made of four additional textboxes, each of which should
contain one of the four consecutive digits (0-9) that will compose the password.
The default password is “1234”.
In case of enabling two security levels, the Password parameter will show twice,
being the first one referred to the password of Level 1, and the second one to
the password of Level 2. The default password for Level 2 is “5678”.