Operation Manual

Z41 Lite
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
22
section 3.4.2.5), next to the checkbox that enables/disables the sending of
the switch-off order. The default value is “Time OFF”.
Label for “Scene”: field that permits customising the label that will be shown
within the configuration pages of the weekly timers (see epigraph e) in section
3.4.2.5), next to the checkbox that enables/disables the sending of scenes.
The default value is Scene”.
3.2.2 SECURITY
Figure 15 Security (Main Configuration)
This screen permits selecting how many security levels (one or two) will be available
for the configuration of the access to the control pages. In other words, it permits
setting one or two different passwords, so the integrator can afterwards configure
whether the access to each page will be protected by one password or another, or
remain unprotected – every page can be independently configured. Figure 16 shows
the “enter password” dialog shown to the user when trying to access a protected page.