Operation Manual

Z41 Lite

http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com

3.2.1 GENERAL

Figure 14 General (Main Configuration)

The General screen contains the following parameters:Power Supply

Voltage: lets the integrator specify the particular voltage of the external

supply powering Z41 Lite. The available values are 12 (by default), 24 and 29

volts. Selecting one option or another will only cause an internal correction

over the temperature value measured by the built-in probe.

Default Theme (after programming): permits selecting the user interface

colour scheme (out of 8 different options) to be loaded after the ETS

download. The final user will have the option to switch the scheme from the

Profile page (see section 2.3), unless such option is disabled by parameter.

Screen Illumination: lets defining whether the backlight should behave

during inactivity according to section 2.5 (Turn off screen), or if on the

contrary the screen should never turn off entirely (Attenuate the screen) or

not even attenuate the light level (Max illumination always).