Operation Manual

Roll-ZAS
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
9
2 CONFIGURATION
2.1 THE ROLL-ZAS APPLICATION PROGRAM
The Roll-ZAS application allows controlling a set of domotic functionalities in a simple
and intuitive manner.
Several parameters are provided for configuring the general functionality of the
controller, such as: luminosity, touch panel lock, initial update, internal sensor, contrast,
buzzer sound, presence simulation, etc.
Pages.
The information shown on the display is divided into pages. It is possible to
enable and configure up to 4 different button pages (pages 1-4), as well as
the specific pages Configuration, Security, Indicators and Screensaver.
All of them are explained in detail in section 3.3.
Browsing through the configured pages is explained in detail in section 2.3.
Inputs.
ZAS incorporates 2 opto-coupled inputs each of which may be individually
configured as a switch/sensor, a temperature probe or a motion sensor.
Depending on the selected configuration, different external elements need to
be required to the ZAS input terminal: push buttons or switches, temperature
probes (such as Zennio ZN1AC-NTC68) or motion sensors (such as Zennio
ZN1IO-DETECT).
Thermostats.
ZAS allows enabling and configuring independently up to 2 thermostats,
with the "Building" functionality.