Operation Manual

Roll-ZAS

http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com

Starting / Finish time: establishes the start time (hours and minutes) at

which the presence simulation will begin (and finish), provided that the

functionality needs to have been enabled first, by sending a “1” through the

"[Sim] Presence simulation" object.

Note: the start and finish times must be different; if not, the presence

simulation may behave unexpectedly.

Minimum/Maximum ON/OFF time: sets the minimum and maximum time

lengths desired for the ON and OFF states.

Note: the value set as maximum (both for the ON and the OFF states) must

be greater than the value set as minimum. If not, the presence simulation

may behave unexpectedly.