Operation Manual

Roll-ZAS
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
36
3.3.4 INDICATORS
From this window it is possible to enable and configure up to 6 general indicators of
different types.
Figure 20. Indicators Window
Binary: shows a text (configurable by parameter) on the screen according to
the value ("0" or "1") received through the "[Ind x] Binary indicator" object.
Counter: shows on the screen the value received through the "[Ind x] 1-byte
indicator" object.
Scaling: shows on the screen the value received through the "[Ind x] Scaling
indicator" object.
Enumeration: allows the definition of up to 6 discrete values with their
corresponding labels (configurable by parameter). Depending on the value
received through the "[Ind x] Enum indicator" object, one string or another will
be shown on the screen.
Float: shows on the screen the value received through the "[Ind x] Float
indicator" object and the corresponding measurement units (text configurable
by parameter).
The name of every indicator (i.e., the label to be shown on the screen) can also be set
by parameter.
3.3.5 SCREENSAVER
The screensaver is a special page that will only be shown after a period of inactivity,
configurable by parameter.