Operation Manual

Roll-ZAS
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
15
3 ETS PARAMETERISATION
To begin with the parameterisation of the ZAS controller it is necessary, once the ETS
program has been opened, to import the database of the product (Roll-ZAS application
program).
Next, the device should be added to the project where desired. And then, one right-
click on the device will permit selecting "Edit parameters", in order to start the
configuration.
A detailed explanation about the different functionalities of the device is provided in the
next sections.
3.1 DEFAULT CONFIGURATION
This section shows the default parameterisation the device starts from.
Figure 8. Default Topology
Figure 8 shows the communication objects available by default: “[General] Time”,
which will send or receive the current daytime, the “send” and “receive” scene objects
(“[General] Scenes: receive” and “[General] Scenes: send”) and the “[General]
Buzzer enabling” object, which allows enabling/disabling the sound of the built-in
buzzer.
When entering the parameter edition of Roll-ZAS for the first time, the following window
will be shown.