Operation Manual
InZennioZ41
http://www.zennio.com TecnicalSupport:http://zenniodeu tsch.zendesk.com
95
Number Size I/O Flags Data Type (DPT) Functional range 1st boot P Reboot P Name Function
1 Byte O C T R - - DPT_Value_1_Ucount 0 - 255 -
-
[PX][BX] Mode Control Heat, Cool, Auto, Fan and Dry
1 Bit O C T R - - DPT_UpDown 0/1 -
-
[PX][BX] Mode Control 0 = Cool; 1 = Heat
1 Bit O C T R - - DPT_Switch 0/1 -
-
[PX][BX] Temperature Offset
Control
0=Decrease; 1=Increase
2 Bytes O C T R - - DPT_Value_Temp -273.00 – 670760.00 -
-
[PX][BX] Temperature Offset
Control
Relative Float Value
2 Bytes I/O C T R W - DPT_Value_Tempd
-670760.00 –
670760.00
-
-
[PX][BX] Temperature Control
Absolute Float Value
1 Bit O C T R - - DPT_Step 0/1 -
-
[PX][BX] Light On/Off 0=Off; 1=On
1 Bit O C T R - - DPT_Heat_Cool 0/1 -
-
[PX][BX] Move Shutter 0=Up; 1=Down
1 Byte O C T R - - DPT_HVACContrMode
0 = Auto
1 = Heat
3 = Cool
9 = Fan
14 = Dry
-
-
[PX][BX] Enumerated Control 0...255
1 Bit O C T R - - DPT_Step 0/1 -
-
[PX][BX] 2-byte Float Control -671088.64...670760.96
1 Byte O C T R - - DPT_HVACMode
1 = Comfort
2 = Standby
3 = Economy
4 = Protection
-
-
[PX][BX] 2-byte Signed Int
Control
-32768...32767
1 Byte I/O C T R W U DPT_Scaling 0% - 100% -
-
[PX][BX] 2-byte Unsigned Int
Control
0...65535
1 Bit O C T R - - DPT_Switch 0/1 -
-
[PX][BX] Percentage Control 0-100%
1 Bit O C T R - - DPT_Switch 0/1 -
-
[PX][BX] 1-byte Signed Int
Control
-128...127
1 Bit I C T - W - DPT_Ack 0/1 -
-
[PX][BX] 1-byte Unsigned Int
Control
0...255
1 Bit O C T R - - DPT_Trigger 0/1 -
-
[PX][BX] Binary Control 1-bit Control
10, 13, 16, 19,
22, 25, 28, 31,
34, 37, 40, 43,
46, 49, 52, 55,
58, 61, 64, 67,
70, 73, 76, 79,
1 Bit O C T R - - DPT_Step 0/1 -
-
[PX][BX] Energy Monitor:
reset
0=No Action; 1=Reset
1 Bit O C T R - - DPT_Switch 0/1 - -
[PX][BX] Chrono-thermostat:
on/off
0=Off; 1=On