Operation Manual
InZennioZ41
http://www.zennio.com TecnicalSupport:http://zenniodeu tsch.zendesk.com
93
Number Size I/O Flags Data Type (DPT) Functional range 1st boot P Reboot P Name Function
5 1 Bit I C - - W - DPT_Ack 0/1 -
-
[General] Illumination 0=No action; 1=Light Display
6
1 Bit I C - - W - DPT_Switch 0/1 -
-
[General] Touch Lock 0=Touch disabled; 1=Touch
enabled
1 Bit I C - - W - DPT_Switch 0/1 -
-
[General] Touch Lock 0=Touch enabled; 1=Touch
disabled
7 1 Bit O C T R - - DPT_Switch 0/1 - -
[General] Welcome Object 1-bit Generic Control
8, 11, 14, 17,
20, 23, 26, 29,
32, 35, 38, 41,
44, 47, 50, 53,
56, 59, 62, 65,
68, 71, 74, 77,
80, 83, 86, 89,
92, 95, 98, 101,
104, 107, 110,
113, 116, 119,
122, 125, 128,
131, 134, 137,
140, 143, 146,
149
1 Bit I C - - W U DPT_Switch 0/1 - √
-
[PX][BX] RGB Colour Red, Green and Blue
components
1 Byte I C - - W U DPT_Value_1_Ucount 0 - 255 - √
-
[PX][BX] Daily Timer Enabling
0 = Disabled; 1 = Enabled
1 Byte I C - - W U DPT_Value_1_Ucount 0 - 255 - √
-
[PX][BX] Weekly Timer
Enabling
0 = Disabled; 1 = Enabled
1 Bit I C - - W U DPT_Enable 0/1 1 -
[PX][BX] Chrono-thermostat:
enabling
0 = Disabled; 1 = Enabled
1 Byte I C - - W U DPT_Value_1_Count -128 - 127 - √
-
[PX][BX] Alarm Trigger Trigger
1 Byte I C - - W U DPT_Scaling 0% - 100% - √
-
[PX][BX] Red Channel 0-100%
2 Bytes I C - - W U DPT_Value_2_Ucount 0 - 65535 - √
-
[PX][BX] Special Mode
Indicator
Comfort, Standby, Economy and
Building Protection
2 Bytes I C - - W U DPT_Value_2_Count -32768 - 32767 - √
-
[PX][BX] Fan Indicator 0=Off; 1-33%=Min; 34-
66%=Med; >66%=Max
2 Bytes I C - - W U 9.xxx
-671088.64 –
670760.96
- √
-
[PX][BX] Fan Indicator 0=Auto; 1-33%=Min; 34-
66%=Med; >66%=Max
1 Byte I C - - W U DPT_Scaling 0% - 100% - √
-
[PX][BX] Fan Indicator 0-33%=Min; 34-66%=Med;
>66%=Max
1 Byte I C - - W U DPT_Scaling 0% - 100% - √
-
[PX][BX] Fan Indicator 0-49%=Min; 50-100%=Max
2 Bytes I C - - W U DPT_Value_Temp -273.00 - 670760.00 25.00 √
-
[PX][BX] Mode Indicator Heat, Cool, Auto, Fan and Dry
1 Bit I C - - W U DPT_Heat_Cool 0/1 - √
-
[PX][BX] Mode Indicator 0 = Cool; 1 = Heat
1 Byte I C - - W U DPT_HVACContrMode
0 = Auto
1 = Heat
3 = Cool
9 = Fan
- √
-
[PX][BX] Temperature
Indicator
Absolute Float Value