Operation Manual

  InZennioZ41
http://www.zennio.com TecnicalSupport:http://zenniodeu tsch.zendesk.com

92
ANHANGII.KOMMUNIKATIONSOBJEKTE
”Functional range” shows the values that, with independence of any other values permitted by the bus according to the object size, may be of
any use or have a particular meaning because of the specifications or restrictions from both the KNX standard or the application program itself.
“1st boot” shows the cases where an object is assigned a certain value by the application program after a device download or a full reset. In
case the value of such assignment can be parameterised,
√ is shown in column “P”. Objects showing a hyphen (-) are not assigned a particular value
and therefore can be assumed to be initialised with the value “0” or with the corresponding updated value in case they depend on an external
element (sensors, etc.). Moreover, if the object is sent (or is there an option to send it) to the bus (write or read requests) after a download or a
device reset from ETS, the marks (W) or (R) will be shown, respectively for transmissions or read requests.
“Reboot” shows the cases where an object is assigned a certain value by the application program after a bus power failure. In case the value of
such assignment can be parameterised,
√ is shown in column “P”. Objects showing a hyphen (-) are not assigned a particular value and therefore can
be assumed to maintain their previous value after the failure or with the corresponding updated value in case they depend on external elements
(sensors, etc.). Moreover, if the object is sent (or is there an option to send it) to the bus (write or read requests) after a bus failure, the marks
(W) or (R) will be shown, respectively for transmissions or read requests.
Number Size I/O Flags Data Type (DPT) Functional range 1st boot P Reboot P Name Function
0 3 Bytes I/O C T R W U DPT_TimeOfDay 0:00:00 – 23:59:59 0:00:00 -
[General] Time Current Time
1 3 Bytes I/O C T R W U DPT_Date
01/01/1990 -
31/12/2089
01/01/2000 -
[General] Date Current Date
2 1 Byte C T - - - DPT_SceneControl 0-63; 128-191 - -
[General] Scenes: send Scene Value
3 2 Bytes O C T R - - DPT_Value_Temp -273.00 – 670760.00 25.00 -
[General] Internal
Temperature
Current Temperature (built-in
sensor)
4 2 Bytes I C - - W U DPT_Value_Temp -273.00 – 670760.00 25.00 -
[General] External
Temperature
Temperature to show in the
display