Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
81
3.6 CONFIGURATION PAGE
The Configuration Page tab contains a sole screen, Configuration.
3.6.1 CONFIGURATION
This screen permits the integrator configure the controls that will be available for the
final user within the Configuration page (see section 2.4), as well as the label that will
identify them on the screen. Note that the Configuration page itself can be activated or
hidden from the Configuration screen, under the Menu tab (see section 3.3.1).
Figure 87 Configuration Screen (Configuration Page)
By default, the Time/Date and Programming Button controls are marked as active.
Please refer to section 2.4 for details.
On the other hand, for the Configuration page –as for any other page–, a label
(parameter Title), a box shaping (parameter Automatic Page Shaping; see
section 2.6), and a security level (parameter Protected; see section 3.2.2) can be set.
For details on the Device Pairing function, please refer to ANNEX I. Controlling Z41
Remotely via IP.