Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
69
When the user touches any of these boxes, a pop-up window similar to the next
figure will be shown.
Figure 73 Consumption Monitor. Pop-Up Window.
Prior to detailing the elements shown in the pop-up window, the ETS
parameters for this type of function will be described:
 Consumption Monitor Channel: dropdown list for the selection of the
channel (1 – 6) that will be associated to the box. The channel selected
here must have been enabled from the Consumption Monitor Objects
screen (see section 3.2.6) under the Main configuration tab. This way, the
box will be monitoring the values received through the [Consumption x]
Power / Flow (depending on the channel configuration), [Consumption x]
Energy / Volume (depending on the channel configuration),
[Consumption x] CO2 and [Consumption x] Cost objects, where “x” is
the number of the assigned channel.
Important: although it is possible to assign the “Consumption monitor”
function to any box from any page, it is only possible to monitor as many
as six different consumption channels, as it is not possible to have an
exclusive channel for each of the boxes.
 Accumulated Consumption: determines whether the pop-up window
should show the instant value of the [Consumption x] Energy object or
not.
 CO2: determines whether the pop-up window should show the instant
value of the [Consumption x] CO2 object or not.
Evolution of the Power (or
Flow) Consumption
Instant Value of the
Energy (or volume), CO
2
and Cost Objects.
Zoom Level
Validation / Reset / Refresh
Buttons