Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
65
a) RGB
This function is intended for sending orders to thee-colour LED light regulators,
such as LUMENTO X3 RGB from Zennio.
Figure 65 RGB
When the function is assigned to the box, the following parameters come up:
 Object Type: permits selecting what type of object will be used for
controlling the light level of the RGB channels. It may be “Three single
colour objects (DPT 5.001)” (by default) or “One RGB object (DPT
232.600)”. If the former is selected, three 1-byte objects will be enabled
(with their Write and Read flags activated, so they can work as control and
status objects) named:
• [Pn][Bi] Red Channel
• [Pn][Bi] Green Channel
• [Pn][Bi] Blue Channel
Control orders will consist in sending the light level (as a percentage) of
the different channels through the corresponding objects.
If the second option is selected, only one 3-byte object will be enabled:
• [Pn][Bi] RGB Colour
In this case, the light levels of the three channels are sent (and received)
concatenated into the above 3-byte object.
Note: if statuses are received while the luminaire performs a regulation,
this control may become hardly serviceable until such regulation ends.
 Left Button and Right Button: permit selecting the icon that will be
displayed inside the buttons in the box.