Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
64
that corresponds to the mode that the user selects by touching the buttons (see
Table 7), while the status object (which can receive values from the bus
although it gets self-updated as well on button presses) will determine the
indicative icon represented in the box at any time. If this object receives an
unrecognised value from the bus, no icon will be displayed in the indicator.
Special Mode Icon Object Value
Comfort 1 (0x001)
Standby 2 (0x002)
Economy 3 (0x003)
Protection 4 (0x004)
Table 7 Special Modes vs. Icon vs. Object Value
The remaining parameters for this function are:
 Allow Protection Mode: this parameter permits including (“Yes”, default
option) or excluding (“No”) the “building protection” mode from the special
modes listed in the sequential scrolling performed by the buttons.
 Left Button and Right Button: permit selecting the icon that will be
displayed inside the buttons in the box.
Note: a list with all the icons available in Z41 can be found in document “Z41
Icon list”, available at www.zennio.com.
3.4.2.5 OTHER
Figure 64 Other
This category involves the following functions, which can be selected through the
Function parameter.