Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
51
Range Control object Status object
1-byte (unsigned int.)
0 – 255 [Pn][Bi] 1-byte unsigned int control [Pn][Bi] 1-byte unsigned int indicator
1-byte (signed int.)
-128 – 127 [Pn][Bi] 1-byte signed int control [Pn][Bi] 1-byte signed int indicator
Percentage control
0% – 100% [Pn][Bi] Percentage control [Pn][Bi] Percentage indicator
2-byte (unsigned int.)
0 – 65535 [Pn][Bi] 2-byte unsigned int control [Pn][Bi] 2-byte unsigned int indicator
2-byte (signed int.)
-32768 – 32767 [Pn][Bi] 2-byte signed int control [Pn][Bi] 2-byte signed int indicator
2-byte (float)
-671088.64 – 670760.96 [Pn][Bi] 2-byte float control [Pn][Bi] 2-byte float indicator
Table 4 Numerical Controls
For all the six functions, the parameters available are:
Figure 48 1-Byte (Unsigned Int.) 2-Button Control
 Action: sets which of the two buttons will increase the current numerical
value and which will decrease it on user presses. The allowed options are
“Left Decrease, Right Increase” (default) and “Left increase, Right
Decrease”.
 Initial Value: sets which value from the permitted range will be assumed
by the control prior to any button presses. It is always 0 by default.
 Minimum Value: sets which value from the available range will be the
minimum value permitted by the control after a number of presses on the