Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
50
Figure 47 Enumerated Control (Text)
The parameters available are:
 # Enums: number of states (up to 6) that will be distinguished. For every
distinguished state, the parameters Value and Icon will become available,
in order to relate every significant value of the communication object to a
certain icon that will represent it.
 Value j: value (0 – 255) that will be sent through the control object when
the user, after pressing the buttons, sets the control box to state j.
 Text j: indicative text that will be displayed in the box when the status
object (which gets automatically updated whenever a control order is sent,
although it may also receive values from the bus) acquires the numerical
value defined in the above parameter.
e) Numerical Controls
If the box is assigned any of the six numerical functions, user touches over the
buttons will trigger the sending of a certain numerical value to the bus (which
will be progressively increased or decreased with every touch on one button or
the other) through the control object, while the box itself will permanently reflect
the current value of the status object (which gets automatically updated after a
control order is sent, although it may also receive values from the bus).
Table 4 shows, for each of the six functions, the permitted value range and the
name of the control and status objects.